Loading... Please wait...
The SCALA RIDER Q2 MultiSet is fully compatible with
|


After recharging from any outlet, the headset is easily re-attached to the helmet. Just slide it in and out.
Attach the clamp to the bottom of the helmet, and slide the SCALA RIDER Q2 onto the holding reel. Attaching and releasing happens in a matter of seconds. The SCALA RIDER Q2 kit offers not only superb features, ease of use and assembly but also looks great and is universally compatible with Bluetooth cell phones or PDA phones. The wind-resistant microphone provides clear communication even at relatively high-speed driving conditions. The super slim speaker fits even into tight helmets while advanced electronic components lets users initiate, receive or reject calls by voice-control.
Specifications
Talk time: up to 8 hours
Standby time: 10 days
Weight: 1.18 oz (33.5 gr)
Battery type: rechargeable Li-Po
Charging time: 3 hours
Rugged Design: Rain and snow resistant
Certificates: FCC, IC,CE, Bluetooth
Bluetooth® version: 2.0, class 1
Bluetooth Profiles: Headset, Handsfree
Chip manufacturer: Cambridge Silicone Radio (CSR)
Bike-to-Bike intercom communication up to
1,640 ft. / 500m range (full duplex) in wide open terrain
Rider-to-Passenger communications up to
33 ft. / 10m range with all SCALA RIDER® models (full compatibility but not all features supported)
Noise cancellation Microphone
AGC technology: Automatic Volume Control according to speed and ambient noise
VOX technology: Accept or Reject calls by voice commands
Speaker Booster
Fits all full-faced and 3/4 Helmets
Quick-release mechanism for headset
Two ultra-slim speakers – 4.7 mm / 0.18 in.
Four large control buttons
Voice dial
Last-number redial
Call reject
87.5 MHz to 108 MHz receiver
6 Station memory with Search and Store functions
Automatic radio muting for incoming calls
Radio On time: typical on avg. 8-10 hours
MP3 player connectivity via provided cable
GPS ready for voice instructions (override phone calls)
110/240V 50/60Hz Universal Travel Charger
* Voice activated features must be supported by mobile device or mobile service provider